BR
Pneumatic motor: Keywords pneumatic motor, air pressure motor, micro motor, air motor, motor imported from Italy, etc.
Company official website:
●
Oubo pneumatic motor< br/>
Product Features
◆Small volume and high power
The diameter and long OBO pneumatic motor can output power, and the ratio of volume/power or weight/power is much smaller than that of electric motors.
◆Small volume and high torque
Only under kilogram air pressure, the OBO pneumatic motor with a small diameter can safely output greater than torque, which is extremely difficult for ordinary electric motors and hydraulic motors. Because the parts are subject to the high-pressure characteristics of the hydraulic system, they also need to be made relatively large. Hydraulic products are only suitable for high torque requirements, and the cost of the hydraulic system is relatively high. The starting torque of pneumatic motors is also much larger than that of electric motors. Commonly used pneumatics in OBO series The output torque range of the motor basically covers the main requirements of small and medium torque for industrial applications (up to ultra-high torque pneumatic torque motors can also be supplied according to demand). Therefore, for small and medium-sized power sources that require torque characteristics (or large thrust and pull characteristics), OBO pneumatic motors are undoubtedly the best choice.
◆Small volume and high speed
The OBO pneumatic motor with the smallest diameter can output r speed and maintain high dynamic balance stability.
◆Simple and compact appearance
The regular cylindrical shape makes application and installation very easy. It can be installed inside a narrow machine (or tool) or outside the machine, and it is simple and beautiful and can be replaced with different materials. Housing, such as stainless steel
◆High adaptability
The speed of the OBO pneumatic motor can change with the load until overload shutdown without causing any damage to the pneumatic motor, so it can be considered when choosing Use a lower safety factor.
◆Emergency start, emergency stop
The time constant determined by the ratio of inertia/power is small, so the steering can be started and stopped quickly or smoothly, especially suitable for frequent starts and stops. very easy.
◆High and low speed, high and low torque, simple stepless speed adjustment, simple torque adjustment
Just adjust the flow valve or pressure regulating valve at the inlet/exhaust port to obtain stepless speed changes ( or torque change), from zero to a maximum of tens of thousands of revolutions, the operation is very easy to increase/decrease the air pressure or air flow, and can easily increase/decrease the power speed and torque output of the motor. It can also reduce the speed and maintain high power.
◆Rich specifications
Oubo’s pneumatic motors are divided into different series, right-hand and left-hand bidirectional rotation, different output speeds and torques, and equipped with different output shafts and different installations. form, so it can meet most uses in industry. OBO also provides pneumatic motors dedicated to certain industries, and a wealth of accessories, and even designs and manufactures special pneumatic motors according to customer needs.
◆Simple structure, long-term durability and high reliability
Contains few moving parts, only the blades need to bear friction, the simple and reasonable mechanism can transmit high loads (or torque), so the pneumatic motor has a long service life and requires very little maintenance. The Italian OBO company has fifty years of successful experience in solving blade friction problems. OBO's pneumatic motors can be used for a long time without the need to replace the blades. The air source of the oil-free pneumatic motor does not need to carry oil mist and is self-lubricating. OBO pneumatic motor warranty period: eighteen months (except for first time use).
◆Precision manufacturing
The transmission mechanisms are made of special steel that is small in size and can withstand high loads, and is processed using high-precision CNC machining centers, special heat treatment, precision assembly, strict testing and quality control. Therefore, the ultra-low friction runs smoothly, can meet the requirements of high-intensity operation and maintain a long service life. All bearings only use top-notch high-precision bearings from Europe or Japan. The service life is many times longer than that of ordinary bearings, and can withstand greater loads and have smaller clearances. The radial runout/axial movement of the output shaft of the small motor is very small, which can be as low as (need to make a request when ordering). Ultra-high-precision pneumatic motors at the machine tool spindle level can be supplied. Most of the motor models do not use any soft seals. Strict sealing is still maintained, and therefore, compared to motors with soft seals, OBO's pneumatic motors are more suitable for harsh environments.
◆High Efficiency
High-precision processed parts, on the one hand, make the assembly of the motor extremely sealed, effectively reducing the leakage of compressed air, on the other hand, the rotation resistance of the motor is very small The special motion mechanism makes the transmission of rotational motion smoother. Starting air pressure can be as low as kilograms.
◆Not affected by the external environment and/or does not affect the external environment
Since the internal pressure is greater than the external pressure when the pneumatic motor is running, the operating pneumatic motor is not affected by the external environment, and even In harsh environments such as dust, moisture and dirt, a motor with enhanced sealing can be provided to completely isolate the motor from the outside world (request must be made when ordering), which not only prevents external substances from intruding into the motor, but also prevents gas or lubricating oil inside the motor from leaking. It can be used in water, acidic or alkaline liquids, or even directly soaked in drinks or food. It can completely provide pneumatic motors that meet the requirements of industries such as pharmaceuticals, food, cosmetics, chemicals, etc., or can be used in environments with cutting fluid and cutting waste.
◆Safety, explosion-proof, low temperature
It does not produce sparks, overheating (oil-gas lubrication or grease lubrication design), explosion short circuit (the pneumatic motor itself or the air supply) and other dangerous factors, OBO pneumatic motors are not explosion-proof. Affected by electrical shock, it is especially suitable for environments with flammable and explosive substances or even high temperatures, such as stirring solvents, paints, chemicals, etc. It is also suitable for situations where overheating is required, such as when used in machine tools. Most products have passed European explosion-proof certification.
◆Effectively reduce noise
Noise is a weak point of pneumatic motors compared to electric motors, but Oubo can provide a variety of effective measures to reduce noise. This is why Oubo is better than competitors of similar products. One of the advantages. Moreover, the exhaust port can be connected to an external air pipe to centrally discharge exhaust gas and noise to other locations.
◆Easy maintenance
The simple, strong and effective mechanism makes maintenance and repair work very simple. It is easy to replace individual parts, and most parts are in stock in China. We know that this is very important for machine builders and users.
◆Rich control and application methods
Based on the above outstanding features, users can carry out very rich and flexible control and application of OBO's pneumatic motors, and can easily develop and derive Customer's own products. Can be supplied upon request: different shaft forms, different appearance shapes (or shells made of different materials), different installation forms, different sealing properties, different rotational accuracy to meet special requirements or even exceed standard specifications, different rotational speeds (from one to tens of thousands of rotations per minute) or torque (from zero to tens of thousands of Newton meters) special pneumatic motors.
◆ Rich experience
A large number of OBO pneumatic motors are used in OBO or its customers’ machines (accounting for more than % of the market in Italy and more than % of the market in Europe), so OBO has accumulated a wealth of experience and technical skills, which is very helpful whether it is continuously improving and upgrading products or providing the most professional services to customers.
◆High cost performance
More than % of the parts are produced by the Oubo factory. Oubo can strictly control the quality and cost, and the serialized and standardized product specifications enable mass production, using special Special processing methods and special tools not only improve productivity and further reduce costs, but also improve processing accuracy and further gain experience in controlling product quality.
The above points are the advantages of OBO pneumatic motors over electric motors, as well as over similar products on the market, and are also the main reasons for their wide adoption. OBO pneumatic motors are better than electric motors in terms of development and design, or power, torque and speed performance, and the compressed air is safe, clean, quick to operate and explosion-proof. They are widely used in various industrial fields and have mature compressed air control technology. OBO pneumatic motors can be used in many fields such as light industry, heavy industry, national defense, scientific research and so on.
Pneumatic motors, pneumatic motors, micro motors, air motors, motors imported from Italy, etc.